हे प्लगइन WordPress च्या शेवटच्या 3 महत्त्वाच्या प्रमुख पुनर्वितरणांच्या साथी चाचणी झालेले नाही. हे येथे वापरल्यास सामर्थ्य देणार नाही किंवा त्या आधारित असु शकते आणि WordPress च्या अधिक अद्ययावत आवृत्तींसह वापरताना संगतता समस्यांची शक्यता आहे.

Spam_BLIP

वर्णन

Spam BLIP stops comment and ping spam from being posted, primarily by
checking the IP address attempting to post a comment in one or more
of the public DNS blacklists. A number of options are available
to refine the check, and with the option defaults, a DNS lookup
is only performed the first time an address attempts to post a
comment; thereafter, the address might quickly ‘pass’ because it
was not listed, or quickly be rejected because it was listed.
Spam BLIP creates, and maintains, a database table for this purpose,
and database lookups are quite fast. Therefore, concerns about
DNS lookup time can be limited to an initial comment attempt.

Here are some features of Spam BLIP to consider if you are
not yet falling over yourself to get it installed:

  • When WordPress is producing a page for a visitor, it checks
    whether comments are open for each post, and it allows plugins
    to “filter” the check. Spam BLIP uses that filter, but does not
    do DNS lookups at this stage, because DNS lookups can take
    perceptible time. Spam BLIP does check optional user-set
    black and white lists, and optionally existing comments that
    are marked as spam, and of course Spam BLIP’s own database records.
    Those checks are fast, so they should not have a perceptible
    effect on page loading. Furthermore, on pages with multiple
    posts, WordPress runs the filter for each, but Spam BLIP
    stores the first result, so even the fast checks are not
    repeated.

  • When a comment is actually submitted, Spam BLIP does the above
    checks, then the DNS lookup only if necessary. At this stage,
    if the DNS lookup causes a perceptible delay, a real human
    (or very clever pet) making the comment should perceive it
    as mere server-side processing. As for spammer robots . . .
    let them wait.

  • Spam BLIP comes configured with blacklist domains that have
    worked well during development, so a user should not need to
    be concerned with the blacklists, but there is an advanced
    option to add or delete, activate or disable (yet save)
    list domains, and configure the interpretation of a return
    from a successful lookup.

  • Spam BLIP provides user-set whitelist and blacklist options.

  • Spam BLIP provides options to check for pings/trackbacks, and
    for user registrations. (The option to blacklist-check user
    registration is off by default. See “Tips” under the help
    tab on the Spam BLIP settings page.)

  • Spam BLIP provides options to configure a ‘Time To Live’ (TTL)
    for its database records, and a maximum number of records.
    The TTL is important because, generally, an IP address should
    not be marked permanently. Consider an ISP that quickly
    disables any account that is found to be spamming. An honest
    ISP is also a victim of spammer abuse, and will need to reuse
    addresses. DNS blacklist operators provide means for IP
    address owners to get records removed — Spam BLIP provides
    a configurable TTL for its records. (Database table maintenance
    is triggered approximately hourly by a WordPress cron event.)

  • Spam BLIP will optionally check if a commenter address is a
    TOR exit node. TOR (The Onion Router) is an important protection
    for people who need or wish for anonymity. You may want to
    accept comments from TOR users (you should), but unfortunately
    spammers have exploited and abused TOR, which has led some
    DNS blacklist operators to include TOR exit node addresses
    whether or not it is known that the address is spamming. If you
    enable this option (you should), it might let some spam get
    through. In this case, mark the comment as spam, and use the
    Spam BLIP option to check existing comments marked as spam; or
    use Spam BLIP in concert with another sort of spam filter, such
    as one that analyzes comment content. (Please report any
    conflict with other, non-DNS blacklist type spam plugins.
    Note that Spam BLIP is not expected to work in concert with
    other DNS-type anti-spam plugins.)

  • Spam BLIP includes a widget that will show options and records
    information. The widget might or might not be an enhancement
    to your page, but in any case it should provide feedback
    while you evaluate Spam BLIP, so it might be used temporarily.

स्क्रीनशॉट

  • The Spam BLIP optional information widget display.

  • The Spam BLIP settings page TTL and maximum records options.

  • The Spam BLIP DNS blacklist domain editor option.

स्थापना

Spam BLIP is installed through the WordPress administrative interface,
and does not have additional requirements for installation.

नेहमी विचारले जाणारे प्रश्न

What is the ‘BLIP’ in “Spam BLIP”?

Think ‘BLacklist IP’.

समीक्षा

ह्या प्लगइनसाठी कोणतेही समीक्षण नाही.

योगदानकर्ते आणि विकसक

“Spam_BLIP” हे मुक्त स्रोत सॉफ्टवेअर आहे. पुढील लोक या प्लगइनच्या निर्मितीत योगदान केले आहे.

योगदानकर्ते

भाषांतर करा “Spam_BLIP” तुमच्या भाषेत.

विकासातील आग्रह?

कोड ब्राउझ करा, SVN संग्रहालय तपासा, किंवा विकास लॉग च्या RSS द्वारे सदस्यता घ्या.

बदलांची यादी

1.0.8.1

  • Check with WordPress 5.2.
  • minor bug fix.

1.0.8

  • Check with WordPress 4.6.
  • Misc. cleanups in code.

1.0.7.1

  • Correct error in repository checkin of 1.0.7.

1.0.7

  • Check with WordPress 4.5.
  • Widget update for theme preview selective refresh.
  • Simplify by removing options for comments/pings_open, and
    bailout.

1.0.6

  • Check with WordPress 4.3.
  • Fix URL preparation bug in plugin_page_addlink().
  • Remove uses of PHP extract().

1.0.5.1

  • Fix bug in widget introduced in 1.0.5.

1.0.5

  • Checks with WordPress 4.0: OK.

1.0.4

  • Checks with WordPress 3.9.1: OK.
  • Add more advisory locking around database table accesses.
  • Bug fix in black/white list range handling (from 1.0.3).

1.0.3

  • Black/White list settings now accept a sub-network specified
    as a range from minimum to maximum subnet address, as in
    “N.N.N.N – N.N.N.N” (note the dash separator), which is
    common in WHOIS listings.
  • Bugfix: typo in code that checks for reserved addresses. It had
    only affected logging, using string “LOCALHOST” rather than
    “RESERVED”.
  • Changed JS naming convention from dev.js -> .js to .js -> min.js.
  • Checked with shiny new WordPress 3.9, but not with PHP 3.5 and
    new WP DB code used with PHP 3.5 — feedback welcome.

1.0.2

  • Small code cleanups.
  • Tweak database table options: Intro text re. max records clarified;
    TTL option radios added for two and four weeks, max data records
    option radio added for 200 records, defaults increased to
    two weeks and 200 records respectively.
  • User-set blacklist and whitelist:
    Now a net-address/net-mask is accepted, so a whole subnet may be
    blacklisted or whitelisted. See settings page “Advanced Options”
    introduction text.

1.0.1

  • Small code cleanups.
  • Made the “Screen Options” tab -> “Section Introductions” checkbox
    value persistent, if the “Save Settings” button is clicked.
  • Style tweaks and size tweaks (admin) in response to WP 3.8 changes.
  • Checked with WP 3.8: OK.

1.0.0.2

  • No real change: just a correction of an error in the
    special file headers used for information display
    in the admin interface and at WordPress.org plugin
    pages.

1.0.0

  • Initial release.